Can Line Sensor DLU

Can Line Sensors DLU

For the production and filling of cans

Can line sensors of the type DLU are used along the conveyor line to detect aluminium or tinplate cans. The can line sensor has two sensor elements which are matched to each other. These enable the detection of all common aluminium and tinplate cans.

The advantage of this sensor is its adaptability to the process. Among other things it is possible to detect a can jam or to fade out gaps between cans. Due to its numerous functions, the DLU is the optimal sensor for feeding from the cup press to the bodymaker, to the washer, feeder, dryer, coating unit, printing and filling line and the downstream process steps, right up to packaging.

Functions

Can detection
Motion detection
Speed control
Jam detection
Gap detection
Gap suppression

Your advantages

Can jam, can direction and can speed control
Adjustable can type
Can diameter from 53 mm
Aluminium and tinplate cans
Ambient temperature 0°C up to +50°C
Switch on/off delay adjustable approx. 0 - 10s
No second sensor is required

To our application reports >>

Overview accessories (not included in the delivery scope)

Select the HM 7 angle bracket as an accessory. It enables simple mounting of the DLU can line sensor, in combination with the HM 8 or HM 9 mounting bracket (various sizes). An adaptation to existing Sencon mounting brackets is possible.

Mounting bracket HM 9